![](http://thaimeasuring.com/wp-content/uploads/2022/02/header-01.jpg)
EAC-SP
VOLTAGE: UP TO 700VAC / 1000VDC per phase | CURRENT: UP TO 2000A per phase | POWER: UP TO 12kVA
The electronically controllable AC-Source EAC-SP have a switching power supply at the input and a linear power amplifier on the secondary side. The devices are used to simulate voltages, currents, frequencies and waveforms independently of the mains, 1-phase.
Technical data:
- Power from 250VA to 12kVA
- Output voltage up to 700VAC / 1000VDC
- Output current up to 2000A
- Output frequency up to 2000Hz
- Indication via graphic display
- Linear regulated power amplifier, distortion factor at Pmax: 0.15%
Features:
The EAC-SP series has the following features, more details can be found in the datasheet
- Generation of any voltage and current curves via SD card or digital interface (sequential control)
- Data log function: Current measured values are stored on an SD card at an adjustable interval.
- Measurements of voltage (RMS, average value, peak value, crest factor), current (RMS, average value, peak current, crest factor) Active power, reactive power, apparent power, power factor
- Specification of frequency and phase angle
- Voltage constant – Current limited
- Storage locations for freely programmable waveforms (WAV files), can be imported via an external SD card (option)
- External oscillator input +/- 10V with adjustable delay up to 70ms (option)
- Script control: Programming of sequences stored on the memory card
- Three non-volatile curves (programming via memory card)
- The script control in connection with the data log function enables the setup of an independent “stand-alone” test station
- Sync input for synchronizing with external sources (option)
- Sync output for triggering external measuring devices or similar (option)
- Output voltage can be switched off for a certain number of half periods (option)
- Output voltage can be switched on for a certain time (option)
- Available digital interfaces IEEE488, RS485, RS232, LAN and USB
- ATI 5/10 analog interface galvanically isolated: 0V bis 5V or 0 bis 10V
- Compact dimensions and low weight
- Special versions available on request
Applications:
- Simulation of worldwide voltage networks (1 – phase)
- Simulation of aeronautical, space, railway and maritime voltage networks
- AC power supply for use in laboratories and test fields for electrical components
- Testing of medical specific waveforms according to EN 60601.
- Independent stand-alone test station realizable via the script control in connection with the data log function